Skip to main content

Pressure Vacuum Breaker Assembly (PVB)#

  • Only one PVB is required to serve the whole system. Control valves may be located downstream of (after) the PVB.
  • PVBs must be installed a minimum of 12 inches above the highest point of water they serve.
  • No chemical or fertilizer may be introduced into an irrigation system equipped with PVBs.
  • No pumps or back pressure sources are permitted on the downstream side of a PVB.
  • PVBs must be tested by a state-certified backflow assembly tester at the time of installation, when moved or repaired and at least every three years.

Did You Know?

You can enroll your electric water heater in Peak Partners and automatically shift when your water is heated.

Opening windows on summer evenings brings in cool outdoor air.

You can save water by installing WaterSense showerheads.