Skip to main content

National Weather Service Issues Flood Warning Advisory for Poudre River

Posted on: Jun-11-2015

The National Weather Service has issued a flood ‘warning’ for the Poudre River, affecting parts of Larimer County and Fort Collins. In addition to high water levels from typical spring runoff, a large storm system with more rainfall is expected this afternoon through tomorrow.

At 9:15 a.m., the Poudre River was at 7.8 feet, with expectations to rise to 10.9 feet by 11 a.m. Friday at Lincoln Avenue. Flood stage is 10.5 feet, and minor flooding is expected. Learn more at https://www.fcgov.com/utilities/safety-and-security/flood-safety-2015.

When used by the National Weather Service, the term ‘warning’ means severe weather has been reported or is imminent, take precautions. The term ‘watch’ means severe weather is possible, be alert. Read more on the National Weather Service at http://weather.gov.

Because soils remain saturated and many local waterways already are flowing at elevated levels, flooding potential is increased throughout the community. Check https://www.fcgov.com/parks/trail-status2.php for bike trail closures due to high water.

Never drive your vehicle into areas where the water covers the roadway. Flood waters are often deeper than they appear. Just 1 foot of flowing water is powerful enough to sweep vehicles off the road.
Sign up at http://leta911.org to receive emergency notifications for Larimer County on landlines, cell phones, or as text or email messages.

Utilities Stormwater staff will continue to monitor the rainfall and flooding potential. View real-time local rainfall and streamflow data at https://www.fcgov.com/floodwarningsystem. To report drainage problems, call 970-221-6700.


Return to news


Did You Know?

Installing occupancy sensors where lights frequently are left on when no one is present can help save money and energy.

You can save water when washing smaller loads by selecting the setting for the corresponding water level.

You can reduce ‘vampire’ power waste by unplugging electronics that are not in use or plugging them into a smart power strip.